1. Advantages and disadvantages of vacuum thermoforming
To determine the success of any manufacturing process, it is necessary to compare it with another processing method, considering whether the cost of products produced by this method is appropriate; or whether the cost of products produced by both methods is the same, but the quality of products produced by this method has been improved. In many applications, injection molding or blow molding compete with vacuum forming.
In terms of packaging technology, unless cardboard is used as the packaging material, vacuum thermoforming technology is unmatched by any other processing method. The main advantage of vacuum thermoforming lies in its engineering economy. Products made of molded composite sheets, foamed sheets, and printed sheets can be produced by simply changing the mold instead of changing the vacuum thermoforming machinery. Products with very thin walls can be vacuum thermoformed using sheets with high melt viscosity, while injection molding of the same wall thickness requires granules with low melt viscosity. For small quantities of plastic parts, the favorable mold cost is another advantage of vacuum thermoforming. For large quantities of parts, the ability to achieve very thin wall thicknesses and high output ratios of vacuum thermoforming machines is highly advantageous.
Vacuum thermoforming can produce the smallest parts as packaging materials for tablets or batteries for watches, and it can also produce very large products, such as garden pools that are 3 to 5 meters long. The thickness of the forming material can range from 0.05 to 15mm, and for foamed materials, the thickness can reach up to 60mm. Any thermoplastic or material with similar properties can be processed through vacuum thermoforming.
The material used for vacuum thermoforming is sheet material with a thickness ranging from 0.05 to 15mm, which is a semi-finished product made from granules or powder. Therefore, compared to injection molding, the raw materials for vacuum thermoforming will incur additional costs.
During vacuum thermoforming, it is necessary to cut the sheet material, which will result in leftover scraps. After crushing these scraps and mixing them with the original material, they can be used to make new sheets.
In vacuum thermoforming, only one surface of the sheet comes into contact with the vacuum thermoforming mold, so only one surface matches the geometric dimensions of the mold. The contour of the other surface of the product is obtained through stretching.
In the field of plastic processing, vacuum thermoforming is considered a processing method with great development potential. It employs molding and is suitable for various fields of plastic packaging. Vacuum thermoforming is also a processing method that requires skilled operation and experience. Nowadays, through simulation processes and necessary professional techniques, vacuum thermoforming has developed into a technically controllable and repeatable processing method.
In recent years, the recycling of scraps generated during the vacuum thermoforming process has become increasingly important. Nowadays, a process has been established where scraps are crushed and mixed with virgin materials for recycling. The recycling of discarded plastic molded products, such as packaging materials and even engineering components, is possible under many conditions, but some still require further development. Currently, the main recyclables are chemical materials and energy materials. To achieve a breakthrough in recycling, efforts must be made to enhance the ecological and economical aspects of the processing process.
Vacuum thermoforming products have the advantages of low cost, high production efficiency, freedom in shape and color selection, corrosion resistance, light weight, and electrical insulation properties. They are widely used in the packaging of stationery, toys, daily necessities, hardware and electrical equipment, electronic products, food, cosmetics, and other products. Nowadays, their application has expanded to billboards, automobiles, industrial accessories, building materials, helmets, washing machine and refrigerator linings, turnover boxes, agricultural supplies, and other products.